Radio-To-Intercom Bridge™

Radio-To-Intercom Bridge™

The Radio-To-Intercom Bridge receiver is designed to interface to an existing wired Public Address Intercom system and allow PA or intercom announcements using your Analog or DMR Digital two-way radio. Each model can operate on VHF LMR business band, UHF LMR business band, or VHF MURS 2-way radios, and can work through radio repeaters.

Leverage your existing intercom system and radio network.
Add a layer of security.

Wireless technology provides a cost-effective and flexible way to provide Public Address / Mass Notification coverage across your entire facility or to isolated pinpoint locations.

Models include:

RIB-600Analog VHF/VHF MURS/UHF bands and
RIB-700DMR, DMR digital, Tier-2 device VHF/UHF bands.

Features
- The Radio-To-Intercom Bridge is designed to be connected to an existing PA/intercom system with its own PA amplifier and wired speakers.
- The Radio-To-Intercom Bridge does not include a back-up battery since it is merely a component of a larger system usually powered by AC and its own battery back-up system.
- Available in Analog and DMR Digital VHF (150-162 MHz) and UHF (450-470MHz) frequency bands. Provides compatibility with business band 2-way radios, License-FREE VHF business band radios (MURS), Family Radio Service and GMRS radios.
- Provides interconnection to the Public Address amplifier through a high impedance, unbalanced AUX input OR a 600Ω, balanced MIC input. Allows personnel to remain mobile while providing access via 2-way radios to existing PA speakers located throughout the facility.
- "Record and Play" allows use of radios in close proximity to PA speakers without feedback. The Radio-To-Intercom Bridge records/buffers received messages up to 24 seconds in length, then plays them over the PA immediately after releasing the PTT button on the radio.
- Easy "Plug and Play" installation.
- Programmable volume control adjusts audio output level 5-99%. Allows custom adjustment for most applications.
- Selective Decode Signaling Analog: 2-Tone, DTMF, Selcall (Group / All Call).
- Selective Decode Signaling DMR Digital: Individual Unit ID / Group Call / All Call to provide an added layer of access control to the PA system.
- Pre-announce tone (similar to existing PA systems) with programmable on/off and volume level.
- NOAA Weather Alert (VHF only).
- Field or PC programmable to frequencies within the respective band (i.e. VHF 150-165 MHz, UHF 450-470 MHz).
- The Radio-To-Intercom Bridge is for indoor use only.
- Designed and Made in the USA.
Additional Resources

Radio To Intercom Bridge

Radio-To-Intercom Bridge™

See How We Helped Improve School Safety

Related Products

JMX Series, MURS/VHF/UHF, JOBCOM 2-Way Radios

PT Series, MURS/VHF/UHF, Ritron 2-Way Radios

7 Series, MURS/VHF/UHF, Ritron Desk-Top 2-Way Radio

7 Series, MURS/VHF/UHF, JOBCOM Desk-Top 2-Way Radio

DoorCom® Wireless Intercom

UHF Liberty Repeater - Analog, 2 Watt and 5 Watt Model

UHF RRX Series Repeater - Full Duplex, Analog, 1-8 Watt Model, Rack Mount

Find A Reseller Near You

Need help? Fill out this form and a Ritron expert will be in touch.